Vishay Semiconductor Diodes Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SS2P6-M3/85A
자세히보기 데이터시트

SS2P6-M3/85A Product Overview

Introduction

The SS2P6-M3/85A is a semiconductor product that belongs to the category of Schottky diodes. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Schottky diodes
  • Use: Rectification and voltage clamping in various electronic circuits
  • Characteristics: Low forward voltage drop, fast switching speed, low reverse leakage current
  • Package: SMC (DO-214AB)
  • Essence: Semiconductor device for power rectification
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Part Number: SS2P6-M3/85A
  • Voltage - Forward (Vf) (Max): 0.58V @ 2A
  • Current - Average Rectified (Io): 2A
  • Voltage - DC Reverse (Vr) (Max): 60V
  • Reverse Recovery Time (trr): 10ns
  • Operating Temperature: -65°C ~ 150°C

Detailed Pin Configuration

The SS2P6-M3/85A has a standard SMC (DO-214AB) package with two pins. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Fast Switching Speed: Enables rapid response in electronic circuits.
  • Low Forward Voltage Drop: Minimizes power loss and heat generation.
  • Low Reverse Leakage Current: Enhances efficiency and reliability.

Advantages and Disadvantages

Advantages

  • High Efficiency: Due to low forward voltage drop and reverse leakage current.
  • Fast Operation: Facilitates quick switching in electronic circuits.
  • Compact Package: SMC (DO-214AB) package offers space-saving design.

Disadvantages

  • Limited Voltage Range: Maximum reverse voltage is 60V, which may not be suitable for high-voltage applications.
  • Temperature Sensitivity: Operating temperature range may limit extreme environment applications.

Working Principles

The SS2P6-M3/85A operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for fast electron flow with minimal voltage drop during forward bias conditions. This enables efficient rectification and voltage clamping in electronic circuits.

Detailed Application Field Plans

The SS2P6-M3/85A is commonly used in the following applications: - Power Supplies - Voltage Clamping Circuits - Switching Power Converters - Solar Panel Systems - LED Lighting

Detailed and Complete Alternative Models

Some alternative models to the SS2P6-M3/85A include: - SS14-M3/85A - SS24-M3/85A - SS34-M3/85A - SS54-M3/85A

In summary, the SS2P6-M3/85A Schottky diode offers fast switching speed, low forward voltage drop, and low reverse leakage current, making it suitable for various electronic applications within its voltage and current ratings.

Word count: 452

기술 솔루션에 SS2P6-M3/85A 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is SS2P6-M3/85A?

    • SS2P6-M3/85A is a Schottky diode with a maximum forward current of 2A and a reverse voltage of 60V.

  2. What are the typical applications of SS2P6-M3/85A?

    • It is commonly used in voltage clamping, protection circuits, and power supply applications.

  3. What is the maximum forward voltage drop of SS2P6-M3/85A?

    • The maximum forward voltage drop is typically around 0.45V at a forward current of 2A.

  4. What is the reverse leakage current of SS2P6-M3/85A?

    • The reverse leakage current is typically very low, around a few microamps at room temperature.

  5. Can SS2P6-M3/85A be used for high-frequency applications?

    • Yes, it has a fast switching speed and can be used in high-frequency applications.

  6. What is the operating temperature range of SS2P6-M3/85A?

    • The operating temperature range is usually from -65°C to 125°C.

  7. Is SS2P6-M3/85A suitable for surface mount technology (SMT) applications?

    • Yes, it is designed for SMT applications and comes in a compact package.

  8. Does SS2P6-M3/85A have any special handling or storage requirements?

    • It is recommended to store SS2P6-M3/85A in a cool, dry place and handle it with proper ESD precautions.

  9. What are the key advantages of using SS2P6-M3/85A in technical solutions?

    • Some advantages include low forward voltage drop, fast switching speed, and high reliability.

  10. Are there any common pitfalls to avoid when using SS2P6-M3/85A in technical solutions?

    • It's important to avoid exceeding the maximum forward current and reverse voltage ratings, as well as ensuring proper heat dissipation in high-power applications.