Vishay Semiconductor Diodes Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SS3P5-M3/85A
자세히보기 데이터시트

SS3P5-M3/85A

Product Overview

Category

The SS3P5-M3/85A belongs to the category of semiconductor devices.

Use

It is used as a Schottky diode for various electronic applications.

Characteristics

  • Low forward voltage drop
  • High switching speed
  • Low reverse leakage current

Package

The SS3P5-M3/85A is typically available in a surface mount SMB package.

Essence

This diode is essential for efficient power management and rectification in electronic circuits.

Packaging/Quantity

It is commonly packaged in reels with quantities varying based on manufacturer specifications.

Specifications

  • Forward Voltage: 0.35V
  • Reverse Voltage: 30V
  • Forward Current: 3A
  • Reverse Current: 10uA
  • Operating Temperature: -65°C to 150°C

Detailed Pin Configuration

The SS3P5-M3/85A typically has two pins, with the anode connected to pin 1 and the cathode connected to pin 2.

Functional Features

  • Fast switching capability
  • Low power dissipation
  • High thermal stability

Advantages

  • Reduced power loss
  • Enhanced circuit efficiency
  • Compact form factor

Disadvantages

  • Limited reverse voltage tolerance
  • Sensitivity to overvoltage conditions

Working Principles

The SS3P5-M3/85A operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for fast switching and low forward voltage drop.

Detailed Application Field Plans

This diode is widely used in: - Power supply units - Voltage clamping circuits - Switching regulators - Overvoltage protection circuits

Detailed and Complete Alternative Models

Some alternative models to the SS3P5-M3/85A include: - SS34 - SS56 - SS110

In conclusion, the SS3P5-M3/85A is a crucial semiconductor device known for its fast switching capabilities, low forward voltage drop, and high thermal stability. Its application spans across various electronic circuits, making it an integral component in modern electronics.

[Word Count: 298]

기술 솔루션에 SS3P5-M3/85A 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is SS3P5-M3/85A?

    • SS3P5-M3/85A is a specific type of semiconductor diode used in technical solutions for its high-speed switching and low forward voltage drop characteristics.

  2. How does SS3P5-M3/85A differ from other diodes?

    • SS3P5-M3/85A differs from other diodes due to its unique combination of high-speed switching capability and low forward voltage drop, making it suitable for applications requiring fast response times and minimal power loss.

  3. What are the typical applications of SS3P5-M3/85A in technical solutions?

    • SS3P5-M3/85A is commonly used in applications such as power supplies, voltage regulation, reverse polarity protection, and signal demodulation due to its high-speed switching and low forward voltage drop properties.

  4. What are the key electrical characteristics of SS3P5-M3/85A?

    • The key electrical characteristics of SS3P5-M3/85A include a forward voltage drop of around 0.36V at 3A, a reverse recovery time of approximately 35ns, and a maximum forward current of 3A.

  5. How does SS3P5-M3/85A contribute to improving technical solutions?

    • SS3P5-M3/85A contributes to improving technical solutions by enabling faster switching speeds, reducing power losses, and enhancing overall system efficiency.

  6. Are there any specific thermal considerations when using SS3P5-M3/85A in technical solutions?

    • It is important to consider the thermal management of SS3P5-M3/85A to ensure that it operates within its specified temperature range, as excessive heat can affect its performance and reliability.

  7. Can SS3P5-M3/85A be used in high-frequency applications?

    • Yes, SS3P5-M3/85A is suitable for high-frequency applications due to its fast switching characteristics and low parasitic capacitance.

  8. What are the packaging options available for SS3P5-M3/85A?

    • SS3P5-M3/85A is commonly available in surface mount packages such as SOD-123FL, which offer compact size and ease of assembly onto circuit boards.

  9. How does SS3P5-M3/85A perform in terms of reliability and longevity?

    • SS3P5-M3/85A is designed for high reliability and longevity, with robust construction and materials that ensure stable performance over extended periods of use.

  10. Are there any specific design considerations when incorporating SS3P5-M3/85A into technical solutions?

    • When designing with SS3P5-M3/85A, it's important to consider factors such as proper PCB layout, thermal management, and appropriate current handling to maximize its performance and reliability in the intended application.