Vishay Semiconductor Diodes Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SS5P6HM3_A/I
자세히보기 데이터시트

SS5P6HM3_A/I

Product Overview

Category: Semiconductor
Use: Power management
Characteristics: High efficiency, low power consumption
Package: SOT-23-6
Essence: Efficient power control
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage: 2.7V to 5.5V
  • Output Current: 500mA
  • Quiescent Current: 17µA
  • Switching Frequency: 1.2MHz
  • Operating Temperature: -40°C to 85°C

Detailed Pin Configuration

  1. VIN (Input voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. SW (Switch node)
  5. FB (Feedback)
  6. VOUT (Output voltage)

Functional Features

  • Integrated synchronous buck converter
  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown
  • Soft start

Advantages and Disadvantages

Advantages: - High efficiency - Small package size - Wide input voltage range - Low quiescent current

Disadvantages: - Limited output current - Restricted operating temperature range

Working Principles

The SS5P6HM3_A/I is a synchronous buck converter that efficiently steps down the input voltage to provide a stable output voltage. It utilizes a high switching frequency to minimize the size of external components and maximize efficiency.

Detailed Application Field Plans

The SS5P6HM3_A/I is ideal for portable electronic devices such as smartphones, tablets, and portable media players. Its low power consumption and small package make it suitable for battery-powered applications where space is limited.

Detailed and Complete Alternative Models

  • SS5P3HM3_A/I: Lower input voltage range, suitable for specific applications
  • SS5P9HM3_A/I: Higher output current, suitable for more demanding loads

This completes the entry for SS5P6HM3_A/I in the English editing encyclopedia format.

기술 솔루션에 SS5P6HM3_A/I 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is SS5P6HM3_A/I?

    • SS5P6HM3_A/I is a specific model of semiconductor diode used in various technical solutions.

  2. What are the key specifications of SS5P6HM3_A/I?

    • The key specifications of SS5P6HM3_A/I include its forward voltage, reverse current, maximum operating temperature, and package type.

  3. How is SS5P6HM3_A/I typically used in technical solutions?

    • SS5P6HM3_A/I is commonly used for rectification, voltage regulation, and protection in electronic circuits and power supply designs.

  4. What are the typical applications of SS5P6HM3_A/I?

    • SS5P6HM3_A/I is often used in battery charging circuits, DC-DC converters, voltage clamping, and reverse polarity protection.

  5. What are the advantages of using SS5P6HM3_A/I in technical solutions?

    • The advantages of SS5P6HM3_A/I include its low forward voltage drop, high surge capability, and fast switching speed.

  6. Are there any limitations or considerations when using SS5P6HM3_A/I?

    • It's important to consider the maximum current rating, thermal management, and potential voltage spikes when using SS5P6HM3_A/I in technical solutions.

  7. Can SS5P6HM3_A/I be used in automotive applications?

    • Yes, SS5P6HM3_A/I can be used in automotive electronics for functions such as voltage regulation and protection against reverse voltage.

  8. What are the recommended soldering and handling practices for SS5P6HM3_A/I?

    • It's recommended to follow the manufacturer's guidelines for soldering temperature, duration, and handling to ensure proper performance and reliability.

  9. Is SS5P6HM3_A/I suitable for high-frequency applications?

    • SS5P6HM3_A/I may not be ideal for high-frequency applications due to its inherent capacitance and switching characteristics. Alternative diode models may be more suitable.

  10. Where can I find detailed datasheets and application notes for SS5P6HM3_A/I?

    • Detailed datasheets and application notes for SS5P6HM3_A/I can typically be found on the manufacturer's website or through authorized distributors.