TLZ3V0-GS08
Product Category: Voltage Regulator
Basic Information Overview: - Category: Electronic Component - Use: Regulating voltage in electronic circuits - Characteristics: High precision, low dropout voltage, low quiescent current - Package: SOT-223 - Essence: Regulates input voltage to a stable output voltage - Packaging/Quantity: Typically available in reels of 250 or 3000 units
Specifications: - Input Voltage Range: 4.5V to 18V - Output Voltage Range: 1.2V to 16V - Dropout Voltage: 300mV at 1A - Quiescent Current: 75µA - Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration: - Pin 1: Input Voltage (VIN) - Pin 2: Ground (GND) - Pin 3: Output Voltage (VOUT)
Functional Features: - High accuracy and line regulation - Low dropout voltage - Thermal shutdown and current limit protection - Fast transient response
Advantages: - Wide input voltage range - Low dropout voltage - Excellent line and load regulation - Small package size
Disadvantages: - Limited maximum output current - Sensitive to thermal conditions
Working Principles: The TLZ3V0-GS08 operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a stable output voltage despite variations in input voltage and load.
Detailed Application Field Plans: - Battery-powered devices - Portable consumer electronics - Embedded systems - Industrial control systems
Detailed and Complete Alternative Models: - LM1117 - XC6206 - AP2112
This completes the entry for TLZ3V0-GS08, covering its product category, basic information overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.
[Word Count: 292]
기술 솔루션에 TLZ3V0-GS08 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is TLZ3V0-GS08?
- TLZ3V0-GS08 is a voltage regulator diode used for overvoltage protection in electronic circuits.
What is the maximum voltage rating of TLZ3V0-GS08?
- The maximum voltage rating of TLZ3V0-GS08 is 3.0 volts.
How does TLZ3V0-GS08 provide overvoltage protection?
- TLZ3V0-GS08 clamps the voltage to a safe level by diverting excess current away from sensitive components when the voltage exceeds its rated value.
What are the typical applications of TLZ3V0-GS08?
- TLZ3V0-GS08 is commonly used in power supplies, communication equipment, and automotive electronics to protect against voltage spikes.
What is the operating temperature range of TLZ3V0-GS08?
- TLZ3V0-GS08 typically operates within a temperature range of -55°C to 150°C.
Is TLZ3V0-GS08 suitable for high-speed data lines?
- Yes, TLZ3V0-GS08 is suitable for protecting high-speed data lines such as USB, HDMI, and Ethernet interfaces.
Does TLZ3V0-GS08 require external components for proper operation?
- TLZ3V0-GS08 does not require external components for basic overvoltage protection, but additional circuitry may be needed for specific applications.
Can TLZ3V0-GS08 be used in battery-powered devices?
- Yes, TLZ3V0-GS08 can be used in battery-powered devices to safeguard against voltage transients.
What is the response time of TLZ3V0-GS08 during an overvoltage event?
- TLZ3V0-GS08 has a fast response time, typically in the nanosecond range, to quickly clamp the voltage and protect the circuit.
Are there any recommended layout considerations for using TLZ3V0-GS08 in a PCB design?
- It is recommended to keep the traces short and minimize the loop area to optimize the performance of TLZ3V0-GS08 in a PCB layout.