Vishay Semiconductor Diodes Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
TLZ5V6B-GS18
자세히보기 데이터시트

TLZ5V6B-GS18 Product Encyclopedia Entry

Introduction

The TLZ5V6B-GS18 belongs to the category of voltage regulator diodes and is widely used in electronic circuits for voltage regulation. This entry provides a comprehensive overview of the TLZ5V6B-GS18, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator Diode
  • Use: Voltage Regulation in Electronic Circuits
  • Characteristics: Low forward voltage drop, high surge current capability
  • Package: SOD-523
  • Essence: Regulating voltage in electronic circuits
  • Packaging/Quantity: Available in reels of 3000 units

Specifications

  • Voltage Rating: 5.6V
  • Current Rating: 200mA
  • Power Dissipation: 225mW
  • Operating Temperature Range: -55°C to +150°C
  • Storage Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The TLZ5V6B-GS18 has a standard SOD-523 package with two pins. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Voltage Regulation: Provides stable 5.6V output under varying load conditions
  • Low Forward Voltage Drop: Ensures minimal power loss
  • High Surge Current Capability: Withstands transient overcurrent conditions

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Compact SOD-523 package
  • High surge current capability

Disadvantages

  • Limited maximum current rating
  • Sensitive to reverse voltage

Working Principles

The TLZ5V6B-GS18 operates based on the principle of zener breakdown. When the voltage across the diode reaches its specified value (5.6V), it starts conducting and regulates the voltage by diverting excess current.

Detailed Application Field Plans

The TLZ5V6B-GS18 finds extensive use in various electronic applications, including: - Voltage regulation in portable electronic devices - Overvoltage protection in automotive electronics - Signal conditioning in sensor interfaces

Detailed and Complete Alternative Models

Some alternative models to TLZ5V6B-GS18 include: - BZX84C5V6LT1G - MMBZ5245BLT1G - PZM5V6GS08

In conclusion, the TLZ5V6B-GS18 is a crucial component in electronic circuits, providing precise voltage regulation and protection against overvoltage conditions. Its compact package and high surge current capability make it suitable for a wide range of applications.

Word Count: 345

기술 솔루션에 TLZ5V6B-GS18 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is TLZ5V6B-GS18?

    • TLZ5V6B-GS18 is a high-performance voltage regulator diode commonly used in technical solutions to regulate voltage levels.

  2. What are the key features of TLZ5V6B-GS18?

    • The key features of TLZ5V6B-GS18 include a low forward voltage drop, high surge current capability, and a compact SOD-523 package.

  3. How does TLZ5V6B-GS18 contribute to technical solutions?

    • TLZ5V6B-GS18 helps stabilize voltage levels in various electronic circuits, protecting sensitive components from voltage fluctuations.

  4. What are the typical applications of TLZ5V6B-GS18?

    • TLZ5V6B-GS18 is commonly used in power management, voltage regulation, and overvoltage protection in electronic devices and systems.

  5. What is the maximum forward voltage of TLZ5V6B-GS18?

    • The maximum forward voltage of TLZ5V6B-GS18 is typically around 0.9V at a forward current of 100mA.

  6. What is the reverse standoff voltage of TLZ5V6B-GS18?

    • The reverse standoff voltage of TLZ5V6B-GS18 is typically 5.6V, providing effective overvoltage protection.

  7. Can TLZ5V6B-GS18 be used in automotive applications?

    • Yes, TLZ5V6B-GS18 is suitable for automotive electronics, offering reliable voltage regulation and transient protection.

  8. Does TLZ5V6B-GS18 require heat sinking?

    • TLZ5V6B-GS18 is designed to operate without the need for external heat sinking under normal operating conditions.

  9. What are the storage and operating temperature ranges for TLZ5V6B-GS18?

    • TLZ5V6B-GS18 typically has a storage temperature range of -55°C to 150°C and an operating temperature range of -40°C to 125°C.

  10. Are there any recommended layout considerations when using TLZ5V6B-GS18 in a circuit?

    • It is recommended to minimize trace lengths and keep the device close to the load to reduce parasitic resistance and inductance. Additionally, proper PCB layout techniques should be followed to optimize performance.