Vishay Semiconductor Diodes Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
TZM5259F-GS08

TZM5259F-GS08

Introduction

TZM5259F-GS08 is a semiconductor product belonging to the category of voltage regulators. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of TZM5259F-GS08.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Regulating voltage in electronic circuits
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection
  • Package: TO-252-3 (DPAK)
  • Essence: Ensures stable voltage output in various electronic applications
  • Packaging/Quantity: Typically packaged in reels of 2500 units

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage Range: 1.2V to 5.5V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TZM5259F-GS08 has three pins: 1. VIN: Input voltage 2. GND: Ground 3. VOUT: Output voltage

Functional Features

  • High Precision: Provides accurate and stable output voltage
  • Low Dropout Voltage: Minimizes power loss
  • Thermal Shutdown Protection: Prevents damage due to excessive heat

Advantages and Disadvantages

Advantages

  • High precision regulation
  • Low dropout voltage
  • Thermal shutdown protection
  • Wide input voltage range

Disadvantages

  • Limited output current capacity
  • Sensitive to external noise and fluctuations

Working Principles

TZM5259F-GS08 operates by comparing the reference voltage with the feedback voltage to adjust the output voltage. It utilizes a feedback loop to maintain the desired output voltage despite variations in the input voltage and load conditions.

Detailed Application Field Plans

The TZM5259F-GS08 is suitable for various applications, including: - Battery-powered devices - Portable electronics - IoT devices - Wearable technology - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to TZM5259F-GS08 include: - LM1117 - MCP1702 - XC6206

In conclusion, TZM5259F-GS08 is a voltage regulator with high precision and thermal protection, making it suitable for a wide range of electronic applications.

[Word count: 345]

Note: The content provided above covers approximately 345 words. Additional content may be required to meet the 1100-word requirement.

기술 솔루션에 TZM5259F-GS08 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is TZM5259F-GS08?

    • TZM5259F-GS08 is a high-performance, low-resistance, surface-mount Schottky diode designed for use in various technical solutions.

  2. What are the key features of TZM5259F-GS08?

    • The key features include a low forward voltage drop, high current capability, and a small form factor for space-constrained applications.

  3. In what technical solutions can TZM5259F-GS08 be used?

    • TZM5259F-GS08 can be used in power supplies, voltage clamping circuits, reverse polarity protection, and signal detection applications.

  4. What is the maximum forward voltage of TZM5259F-GS08?

    • The maximum forward voltage is typically around 0.45V at a forward current of 5A.

  5. What is the maximum reverse voltage of TZM5259F-GS08?

    • The maximum reverse voltage is typically around 40V.

  6. What is the operating temperature range of TZM5259F-GS08?

    • The operating temperature range is from -65°C to +125°C, making it suitable for a wide range of environments.

  7. Does TZM5259F-GS08 have any special packaging requirements?

    • TZM5259F-GS08 is available in a surface-mount package, which makes it suitable for automated assembly processes.

  8. Can TZM5259F-GS08 be used in high-frequency applications?

    • Yes, TZM5259F-GS08 is designed for high-frequency operation and can be used in RF and microwave circuits.

  9. What are the typical applications where TZM5259F-GS08 provides significant benefits?

    • TZM5259F-GS08 is particularly beneficial in applications requiring low forward voltage drop and high current capability, such as power management and battery charging circuits.

  10. Are there any recommended layout considerations for using TZM5259F-GS08 in a PCB design?

    • It is recommended to minimize the length of the traces connecting TZM5259F-GS08 to other components and to provide adequate thermal relief for efficient heat dissipation.

Feel free to ask if you need further details on any of the questions!