Vishay Semiconductor Diodes Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
V30200C-E3/4W
자세히보기 데이터시트

V30200C-E3/4W

Introduction

The V30200C-E3/4W is a high-performance diode belonging to the category of power rectifiers. This component is widely used in various electronic applications due to its unique characteristics and reliable performance.

Basic Information Overview

  • Category: Power Rectifier Diode
  • Use: Rectification of AC to DC power in electronic circuits
  • Characteristics: High voltage and current handling capacity, low forward voltage drop
  • Package: TO-220AB
  • Essence: Efficient conversion of alternating current to direct current
  • Packaging/Quantity: Typically packaged in reels or tubes, quantity varies based on manufacturer

Specifications

  • Voltage Rating: 200V
  • Current Rating: 3A
  • Forward Voltage Drop: 0.95V at 3A
  • Reverse Recovery Time: 35ns
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The V30200C-E3/4W follows the standard pin configuration for a TO-220AB package: 1. Anode (A) 2. Cathode (K)

Functional Features

  • High voltage capability allows for use in various power supply applications
  • Low forward voltage drop minimizes power loss and heat generation
  • Fast reverse recovery time enables efficient switching in high-frequency circuits

Advantages and Disadvantages

Advantages: - High voltage and current ratings make it suitable for demanding applications - Low forward voltage drop results in higher efficiency - Fast reverse recovery time enables rapid switching

Disadvantages: - Relatively large package size compared to surface-mount diodes - Limited to medium power applications due to current rating

Working Principles

The V30200C-E3/4W operates based on the principle of semiconductor junction behavior. When forward biased, it allows current flow with minimal voltage drop, while in reverse bias, it exhibits fast recovery characteristics.

Detailed Application Field Plans

The V30200C-E3/4W finds extensive use in the following applications: - Switch-mode power supplies - Motor drives - Inverters - Welding equipment - Battery chargers

Detailed and Complete Alternative Models

  • V30100C-E3/4W: Lower voltage rating (100V) variant of the same diode
  • V30300C-E3/4W: Higher voltage rating (300V) variant of the same diode
  • V30250C-E3/4W: Slightly lower current rating (2.5A) variant of the same diode

In conclusion, the V30200C-E3/4W power rectifier diode offers high performance and reliability in various electronic applications, making it a preferred choice for power conversion needs.

Word Count: 398

기술 솔루션에 V30200C-E3/4W 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure, here are 10 common questions and answers related to the application of V30200C-E3/4W in technical solutions:

  1. What is the maximum voltage rating of V30200C-E3/4W?

    • The maximum voltage rating of V30200C-E3/4W is 200V.

  2. What is the maximum current rating of V30200C-E3/4W?

    • The maximum current rating of V30200C-E3/4W is 30A.

  3. What type of package does V30200C-E3/4W come in?

    • V30200C-E3/4W comes in a TO-220AB package.

  4. What are the typical applications for V30200C-E3/4W?

    • V30200C-E3/4W is commonly used in power supplies, motor control, and other high current applications.

  5. What is the forward voltage drop of V30200C-E3/4W at its rated current?

    • The forward voltage drop of V30200C-E3/4W at its rated current is typically around 0.95V.

  6. Is V30200C-E3/4W suitable for use in automotive applications?

    • Yes, V30200C-E3/4W is suitable for use in automotive applications.

  7. What is the maximum junction temperature of V30200C-E3/4W?

    • The maximum junction temperature of V30200C-E3/4W is 175°C.

  8. Does V30200C-E3/4W have reverse polarity protection?

    • No, V30200C-E3/4W does not have built-in reverse polarity protection and external measures should be taken to prevent reverse polarity.

  9. Can V30200C-E3/4W be used in parallel to increase current handling capability?

    • Yes, V30200C-E3/4W can be used in parallel to increase current handling capability.

  10. What are the key differences between V30200C-E3/4W and similar diodes in its class?

    • The key differences include its maximum voltage and current ratings, forward voltage drop, and thermal characteristics, which make it suitable for specific technical solutions.

I hope these questions and answers help provide clarity on the application of V30200C-E3/4W in technical solutions. If you have any more specific questions, feel free to ask!