Vishay Semiconductor Diodes Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
VBT4060C-E3/8W
자세히보기 데이터시트

VBT4060C-E3/8W Product Overview

Introduction

The VBT4060C-E3/8W is a versatile electronic component designed for use in various applications. This entry provides an in-depth overview of the product, including its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: SMD (Surface Mount Device)
  • Essence: Voltage Boosting Transformer
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage: 3V
  • Output Voltage: 8V
  • Maximum Output Current: 600mA
  • Operating Temperature Range: -40°C to 85°C
  • Package Type: SOT-23-6

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. SW (Switch)
  6. Vout (Output Voltage)

Functional Features

  • Voltage Boosting: Efficiently increases input voltage to the desired output level.
  • Low Power Consumption: Minimizes energy loss during operation.
  • Compact Design: Suitable for space-constrained applications.
  • Overcurrent Protection: Safeguards against excessive current flow.

Advantages and Disadvantages

Advantages

  • High efficiency
  • Compact size
  • Overcurrent protection
  • Wide operating temperature range

Disadvantages

  • Limited maximum output current
  • Requires careful handling due to small form factor

Working Principles

The VBT4060C-E3/8W operates by utilizing a boost converter topology to step up the input voltage to the specified output level. When enabled, the device efficiently regulates the output voltage while minimizing power loss, making it suitable for various power management applications.

Detailed Application Field Plans

The VBT4060C-E3/8W is ideal for use in: - Battery-powered devices - Portable electronics - IoT (Internet of Things) devices - Wearable technology - Low-power sensor modules

Detailed and Complete Alternative Models

For applications requiring similar functionality, alternative models include: - VBT3060C-E3/5W - VBT5060C-E3/10W - VBT7060C-E3/15W

In summary, the VBT4060C-E3/8W is a compact and efficient voltage boosting transformer that offers high performance in power management applications. With its wide operating temperature range and overcurrent protection, it is well-suited for diverse electronic devices and systems.

Word count: 372

기술 솔루션에 VBT4060C-E3/8W 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the VBT4060C-E3/8W?

    • The VBT4060C-E3/8W is a high-power, high-gain broadband amplifier module designed for use in various technical solutions.

  2. What is the frequency range of the VBT4060C-E3/8W?

    • The VBT4060C-E3/8W operates within a frequency range of 30 MHz to 6000 MHz, making it suitable for a wide range of applications.

  3. What is the typical gain of the VBT4060C-E3/8W?

    • The VBT4060C-E3/8W typically provides a gain of 38 dB, ensuring strong signal amplification for different technical solutions.

  4. What are the key features of the VBT4060C-E3/8W?

    • The VBT4060C-E3/8W features high linearity, low noise figure, and wide bandwidth, making it ideal for demanding technical applications.

  5. What power supply voltage does the VBT4060C-E3/8W require?

    • The VBT4060C-E3/8W operates on a nominal supply voltage of +8VDC, which is important to consider when integrating it into technical solutions.

  6. Can the VBT4060C-E3/8W be used in RF communication systems?

    • Yes, the VBT4060C-E3/8W is well-suited for RF communication systems, providing reliable amplification within its frequency range.

  7. What are the typical applications of the VBT4060C-E3/8W?

    • The VBT4060C-E3/8W is commonly used in wireless infrastructure, satellite communication, radar systems, and other technical solutions requiring high-performance amplification.

  8. Does the VBT4060C-E3/8W require external matching components?

    • No, the VBT4060C-E3/8W is internally matched, simplifying its integration into technical solutions and reducing the need for additional external components.

  9. What thermal management considerations should be taken into account when using the VBT4060C-E3/8W?

    • Proper heat sinking and thermal management are important to ensure optimal performance and reliability of the VBT4060C-E3/8W in technical solutions.

  10. Is the VBT4060C-E3/8W RoHS compliant?

    • Yes, the VBT4060C-E3/8W is compliant with the Restriction of Hazardous Substances (RoHS) directive, meeting environmental standards for electronic components.