Vishay Semiconductor Diodes Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
VS-10WQ045FNHM3
자세히보기 데이터시트

VS-10WQ045FNHM3

Product Overview

Category: Power Semiconductor
Use: Voltage Regulator
Characteristics: High efficiency, low power dissipation
Package: TO-252
Essence: MOSFET
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Voltage Rating: 45V
  • Current Rating: 10A
  • On-State Resistance: 10mΩ
  • Gate Threshold Voltage: 2.5V
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

  1. Gate (G)
  2. Drain (D)
  3. Source (S)

Functional Features

  • Low on-state resistance for high efficiency
  • Fast switching speed
  • Low gate drive power required
  • Avalanche energy rated

Advantages and Disadvantages

Advantages: - High efficiency - Low power dissipation - Fast switching speed

Disadvantages: - Sensitive to overvoltage conditions - Requires careful ESD handling

Working Principles

The VS-10WQ045FNHM3 is a MOSFET-based voltage regulator that operates by controlling the flow of current between the drain and source terminals based on the gate voltage. When the gate-source voltage is applied, it creates an electric field which allows the current to flow from drain to source.

Detailed Application Field Plans

The VS-10WQ045FNHM3 is suitable for various applications including: - DC-DC converters - Power management systems - Motor control - Battery protection circuits

Detailed and Complete Alternative Models

  • IRF1010E: 60V, 84A, 12mΩ
  • FDP8878: 30V, 120A, 4.5mΩ
  • SI2319DS: 20V, 3.6A, 75mΩ

This completes the entry for VS-10WQ045FNHM3 in the English editing encyclopedia format.

기술 솔루션에 VS-10WQ045FNHM3 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is VS-10WQ045FNHM3?

    • VS-10WQ045FNHM3 is a high-performance, fast-recovery rectifier diode designed for various technical solutions.

  2. What are the key features of VS-10WQ045FNHM3?

    • The key features include a low forward voltage drop, high current capability, and fast reverse recovery time.

  3. In what technical applications can VS-10WQ045FNHM3 be used?

    • VS-10WQ045FNHM3 is commonly used in power supplies, inverters, converters, and other electronic systems requiring high-speed rectification.

  4. What is the maximum voltage and current rating for VS-10WQ045FNHM3?

    • The maximum voltage rating is typically 45V, and the current rating is usually in the range of 10A to 20A.

  5. How does VS-10WQ045FNHM3 compare to other similar rectifier diodes?

    • VS-10WQ045FNHM3 offers lower forward voltage drop and faster recovery time compared to many other rectifier diodes in its class.

  6. What are the thermal characteristics of VS-10WQ045FNHM3?

    • VS-10WQ045FNHM3 is designed with low thermal resistance and is capable of handling moderate to high power dissipation.

  7. Can VS-10WQ045FNHM3 be used in automotive applications?

    • Yes, VS-10WQ045FNHM3 is suitable for automotive electronics, provided it meets the specific requirements and standards for automotive components.

  8. Are there any recommended heat sink or mounting considerations for VS-10WQ045FNHM3?

    • It is advisable to use appropriate heat sinks or thermal management techniques when operating VS-10WQ045FNHM3 at high currents or in elevated temperature environments.

  9. What are the typical failure modes of VS-10WQ045FNHM3?

    • Common failure modes include thermal runaway under excessive current or voltage stress, as well as potential damage from transient overvoltage events.

  10. Where can I find detailed specifications and application notes for VS-10WQ045FNHM3?

    • Detailed specifications and application notes for VS-10WQ045FNHM3 can be found in the product datasheet provided by the manufacturer or distributor.