VS-SD403C16S15C
Product Overview
Category: Semiconductor Device
Use: Power supply and control
Characteristics: High efficiency, compact size, low heat generation
Package: SMD (Surface Mount Device)
Essence: Voltage regulator
Packaging/Quantity: Tape and reel, 2500 units per reel
Specifications
- Input Voltage: 3.3V to 5.5V
- Output Voltage: 1.5V
- Output Current: 16A
- Operating Temperature: -40°C to 125°C
- Efficiency: 90%
Detailed Pin Configuration
The VS-SD403C16S15C has a total of 8 pins: 1. VIN (Input Voltage) 2. GND (Ground) 3. EN (Enable) 4. NC (No Connection) 5. VOUT (Output Voltage) 6. VOUT (Output Voltage) 7. GND (Ground) 8. PG (Power Good)
Functional Features
- Overcurrent protection
- Thermal shutdown
- Power good indicator
- Adjustable output voltage
Advantages and Disadvantages
Advantages: - High efficiency - Compact size - Wide input voltage range
Disadvantages: - Limited output current compared to some competitors - Higher cost compared to traditional linear regulators
Working Principles
The VS-SD403C16S15C is a synchronous buck converter that regulates the output voltage by adjusting the duty cycle of the internal switches based on the input voltage and load conditions. It uses pulse-width modulation (PWM) to control the power delivered to the load.
Detailed Application Field Plans
The VS-SD403C16S15C is suitable for various applications including: - Point-of-load power supplies - Networking equipment - Industrial automation - Telecommunications
Detailed and Complete Alternative Models
- VS-SD403C12S15C: Similar specifications with 12A output current
- VS-SD403C20S15C: Higher output current at 20A
- VS-SD403C16S18C: Same output current with adjustable output voltage
In conclusion, the VS-SD403C16S15C is a high-efficiency voltage regulator designed for power supply and control applications. Its compact size and advanced features make it suitable for a wide range of electronic devices.
[Word count: 324]
기술 솔루션에 VS-SD403C16S15C 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure, here are 10 common questions and answers related to the application of VS-SD403C16S15C in technical solutions:
Q: What is the maximum operating temperature for VS-SD403C16S15C? A: The maximum operating temperature for VS-SD403C16S15C is 150°C.
Q: What is the typical forward voltage drop for VS-SD403C16S15C? A: The typical forward voltage drop for VS-SD403C16S15C is 0.7V at 25°C.
Q: Can VS-SD403C16S15C be used in high-frequency applications? A: Yes, VS-SD403C16S15C is suitable for high-frequency applications due to its fast switching characteristics.
Q: What is the reverse recovery time of VS-SD403C16S15C? A: The reverse recovery time of VS-SD403C16S15C is typically 35ns.
Q: Is VS-SD403C16S15C suitable for automotive applications? A: Yes, VS-SD403C16S15C is designed for automotive applications and meets the necessary industry standards.
Q: What is the maximum continuous forward current for VS-SD403C16S15C? A: The maximum continuous forward current for VS-SD403C16S15C is 40A.
Q: Does VS-SD403C16S15C have a low leakage current? A: Yes, VS-SD403C16S15C has a low reverse leakage current, making it suitable for power efficiency requirements.
Q: Can VS-SD403C16S15C be used in parallel to increase current handling capability? A: Yes, VS-SD403C16S15C can be used in parallel to increase current handling capability in high-power applications.
Q: What is the package type for VS-SD403C16S15C? A: VS-SD403C16S15C is available in a TO-220AC package for easy mounting and thermal management.
Q: Are there any application notes or reference designs available for using VS-SD403C16S15C in power supply circuits? A: Yes, application notes and reference designs are available to assist in implementing VS-SD403C16S15C in power supply circuits for various technical solutions.
I hope these questions and answers provide the information you were looking for! If you need further details on any specific question, feel free to ask.