Logic device/transceiver/encoder

8-Channel, 1.65-V to 3.6-V Buffer with 3-State Outputs 20-X1QFN -40 to 125

The NB7V33M is a differential divide-by-4 clock divider with asynchronous reset. The differential clock inputs include internal 50 Ω termination resistors and accept LVPECL, CML, and LVDS logic levels. The NB7V33M generates a divide-by-4 output copy of the input clock, running at speeds up to 10GHz with minimal jitter. The reset pin is active on a rising edge. When powered on, the internal flip-flops will go into a random state. Reset allows multiple NB7V33Ms in the system to synchronize. The 16mA differential CML output provides a matched internal 50Ω termination that provides an output swing of 400mV when the external receiver is terminated into 50Ω to VCC. The NB7V33M is a 4-way version of the NB7V32M (2-way) in a low-profile 3mm x 3mm 16-pin QFN encapsulation. The NB7V33M belongs to the GigaComm family of high-performance clock products.

6-Channel 3V to 18V Inverter with Schmitt Trigger Inputs

SN74AHC1G02 Single 2-Input Positive-NOR Gate

Type: Buffer, Inverting Supply Voltage: 2V~6V Input Type: - Output Type: Three-state Low Level Output Current (IOL): 7.8mA High Level Output Current (IOH): 7.8mA Operating Temperature: -40℃ ~+105℃

SN74LVC2G02 Dual 2-Input Positive-NOR Gate

SN74AHC74 Dual Rising-Edge D-Type Flip-Flop with Clear and Preset

2-Channel, 2-Input, 0.8V to 3.6V Low Power AND Gate 8-UQFN -40 to 85

The FXMA2102 is a high-performance configurable dual-voltage power supply converter that enables bidirectional voltage translation over a wide range of input and output voltage levels. Used as a voltage translator in applications using the I2C bus interface, the input and output voltage levels comply with the I2C device specified voltage levels. An external pull-up resistor is required. The device is designed so that the A port can track the VCCA level and the B port can track the VCCB level. This enables bidirectional A/B port voltage translation between any two levels from 1.65V to 5.5V. VCCA can be equal to VCCB from 1.65V to 5.5V. The OE pin is referenced to VCCA. Either VCC can be powered up first. If either VCC is removed, an internal power-down control circuit places the device in 3-state. Both ports of the device feature automatic orientation sensing. Either port can sense an input signal and pass it on to the other port as an output signal.