Logic device/transceiver/encoder

CD4060B CMOS 14-Stage Ripple-Carry Binary Counter/Divider and Oscillator

SN74AHCT14 Hex Schmitt Trigger Inverter

SN74HC541 Octal Buffer and Line Driver with 3-State Outputs

2-Channel, 4-Input, 4.75V to 5.25V Bipolar AND Gate 14-PDIP 0 to 70

The MC100EP016A is a high-speed synchronous, presettable, cascadable 8-bit binary counter. The structure and operation are the same as the MC100E016 in the ECLinPS series. The counter has internal feedback to the TCbar gated by the TCLD (Terminal Count Load) pin. When TCLD is LOW (or left open, in which case it is pulled to LOW by an internal pull-down), TCbar feedback is disabled, counting continues, and TCbar goes LOW, indicating a unity state. When TCLD is HIGH, TC causes the counter to reload automatically when TC = LOW, thus acting like a programmable counter. The Qn output does not need to be terminated for the counting function to function properly. To minimize noise and power dissipation, unused Q outputs should be left unterminated. COUT and COUTbar provide differential outputs from a non-cascaded counter or voltage divider application. COUT and COUTbar should not be used in cascaded configurations. Only TCbar applies to counter or divider cascaded chain outputs. A differential clock input has been added to improve performance. The 100 Series includes temperature compensation.

SN74HC594 8-Bit Shift Register with Output Register

SN74LS11 Triple 3-Input Positive-AND Gate

SN74LS136 Quad 2-Input Exclusive-OR Gate with Open-Collector Outputs

The MM74HC244 is a non-inverting buffer with two active low enables (1G and 2G), each independently controlling 4 buffers. This device does not have Schmitt trigger inputs. Utilizing advanced silicon gate CMOS technology, these 3-state buffers are general purpose high speed non-inverting buffers. They feature high drive current outputs, enabling high speed operation even when driving large bus capacitances. The speed of these circuits is comparable to low power Schottky devices, while retaining the advantages of CMOS circuits, namely high noise immunity and low power consumption. All three devices have a fanout of 15 LS-TTL equivalent inputs. All inputs are protected from electrostatic discharge damage by diode clamping to VCC and ground.

Multifunction

Single Inverter Logic Chip