Logic device/transceiver/encoder

부품 번호
TI (Texas Instruments)
제조업 자
설명하다
64711 PCS
재고
부품 번호
TI (Texas Instruments)
제조업 자
설명하다
57591 PCS
재고
부품 번호
TI (Texas Instruments)
제조업 자
4-Channel, 2-Input, 2V to 5.5V NOR Gate 14-SOIC -40 to 125
설명하다
89031 PCS
재고
부품 번호
TI (Texas Instruments)
제조업 자
4-Channel, 4-Input, 2V to 6V NAND Gate with Schmitt Trigger Inputs 14-SOIC -40 to 85
설명하다
91329 PCS
재고
부품 번호
TI (Texas Instruments)
제조업 자
4-Channel, 2-Input, 3V to 5.5V OR Gate 16-SOIC -40 to 85
설명하다
76471 PCS
재고
부품 번호
TI (Texas Instruments)
제조업 자
4-Channel, 2-Input, 3V to 18V NAND Gate 14-TSSOP -55 to 125
설명하다
60630 PCS
재고
부품 번호
rochester
제조업 자
설명하다
63583 PCS
재고
부품 번호
ADI
제조업 자
설명하다
68748 PCS
재고
부품 번호
Nexperia
제조업 자
설명하다
56169 PCS
재고
부품 번호
onsemi (Ansemi)
제조업 자
MM74HCT573 Octal D-type Latch and MM74HCT574 Octal D-type Flip-Flop are manufactured with advanced silicon gate CMOS technology, which has the inherent advantages of low power consumption and wide power supply range, and has LS-TTL input and output characteristics, and realizes pin output compatible. The 3-state outputs can drive 15 LS-TTL loads. All inputs are protected from electrostatic discharge damage by internal diodes to VCC and ground. When the MM74HCT573 latch enable input is high, the Q output will follow the D input. When Latch Enable goes low, the data at the D input remains at the output until Latch Enable goes high again. When a high logic level is applied to the output control input, all outputs go into a high impedance state, regardless of what signals are present at the other inputs and the state of the storage element. The MM74HCT574 is a rising edge triggered flip-flop. Data on the D input that meets setup and hold time requirements is transferred to the Q output on a positive-going transition of the clock (CK) input. When a high logic level is applied to the output control (OC) input, all outputs go into a high-impedance state, regardless of the signals present at the other inputs and the state of the storage elements. The MM74HCT device is suitable for interfacing between TTL and NMOS components and standard CMOS devices. These parts are also plug-in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs.
설명하다
83673 PCS
재고
부품 번호
onsemi (Ansemi)
제조업 자
설명하다
95769 PCS
재고
부품 번호
TI (Texas Instruments)
제조업 자
Octal Bus Transceiver 20-SSOP 0 to 70
설명하다
84156 PCS
재고
부품 번호
TI (Texas Instruments)
제조업 자
Octal Bus Transceiver and Registers with 3-State Outputs 24-TSSOP -40 to 85
설명하다
90163 PCS
재고
부품 번호
TI (Texas Instruments)
제조업 자
16-Bit Transparent D-Latch with 3-State Output 48-TVSOP -40 to 85
설명하다
52214 PCS
재고
부품 번호
TI (Texas Instruments)
제조업 자
설명하다
85670 PCS
재고
부품 번호
TI (Texas Instruments)
제조업 자
IEEE Std 1149.1 (JTAG) Boundary-Scan Test Set 24-SOIC 0 to 70 with Octal Bus Transceivers
설명하다
54209 PCS
재고
부품 번호
ADI/MAXIM (MAXIM)
제조업 자
설명하다
85798 PCS
재고
부품 번호
ADI/MAXIM (MAXIM)
제조업 자
설명하다
93941 PCS
재고
부품 번호
ADI/MAXIM (MAXIM)
제조업 자
설명하다
63060 PCS
재고
부품 번호
NXP (NXP)
제조업 자
설명하다
58949 PCS
재고