Logic device/transceiver/encoder

The MM74HCT373 Octal D-Latch and MM74HCT374 Octal D-Type Flip-Flop utilize advanced silicon-gate CMOS technology that can provide the inherent advantages of low power consumption and wide supply range, but with LS-TTL input and output characteristics and pin assignments compatible. The 3-state output is capable of driving 15 LS-TTL loads. protects all inputs from internal diodes to V

Octal Edge-Triggered D-Type Flip-Flops with 3-State Outputs 20-VQFN -40 to 85

3.3V ABT Octal Edge D-Type Flip-Flop with 3-State Output 20-SOIC -40 to 85

20-Bit Bus Interface Flip-Flop with 3-State Output 56-SSOP -40 to 85

The MC74VHC1GT14 is a single gate CMOS Schmitt trigger inverter fabricated using a silicon gate CMOS process. It achieves high-speed operation similar to an equivalent bipolar Schottky TTL while maintaining CMOS low power consumption. The internal circuit consists of three stages, including a buffer output that provides high noise immunity and stable output. The device input is compatible with TTL-type input thresholds, and the output has a full CMOS level output swing. Input protection circuitry on the device allows overvoltage tolerance on the inputs, enabling the device to be used as a logic level translator from 3.0V CMOS logic to 5.0V CMOS logic, or 1.8V CMOS logic to 3.0V CMOS logic, and Capable of running on high voltage power supplies. The MC74VHC1GT14 input structure provides protection when voltages up to 5.5V are applied regardless of the supply voltage. This allows the MC74VHC1GT14 to be used as an interface to 5V to 3V circuits. The output structure also provides protection when VCC = 0V. These input and output structures help prevent device damage due to supply voltage - input/output voltage mismatch, battery backup, hot insertion, etc. The MC74VHC1GT14 can be used to enhance noise immunity or to square slowly changing waveforms.

6-Channel, 2V to 6V Inverter 14-SSOP -40 to 85