Power chip

부품 번호
TI (Texas Instruments)
제조업 자
200mA Inverting Low Dropout Linear Regulator 5-SOT-23 -40 to 125
설명하다
97921 PCS
재고
부품 번호
IDCHIP
제조업 자
설명하다
55582 PCS
재고
부품 번호
Advanced Analog Technology (analog)
제조업 자
Motor Driver with Hall Sensors for Bidirectional DC Motors
설명하다
95187 PCS
재고
부품 번호
UMW (Friends Taiwan Semiconductor)
제조업 자
설명하다
55166 PCS
재고
부품 번호
TI (Texas Instruments)
제조업 자
TPS63700 Adjustable -15V Output Inverting DC/DC Converter with 3x3 QFN encapsulation
설명하다
89236 PCS
재고
부품 번호
silergy
제조업 자
설명하다
78728 PCS
재고
부품 번호
VOLTAIC (Wuxi Vodaco)
제조업 자
설명하다
54029 PCS
재고
부품 번호
ADI/MAXIM(Maxim)
제조업 자
설명하다
62578 PCS
재고
부품 번호
TI (Texas Instruments)
제조업 자
설명하다
83105 PCS
재고
부품 번호
TI (Texas Instruments)
제조업 자
TLV61046A 28-V Output Voltage Boost Converter with Power Diode and Isolation Switch
설명하다
52526 PCS
재고
부품 번호
onsemi (Ansemi)
제조업 자
설명하다
65423 PCS
재고
부품 번호
onsemi (Ansemi)
제조업 자
설명하다
89899 PCS
재고
부품 번호
TI (Texas Instruments)
제조업 자
150mA Low Noise Low Dropout Voltage Regulator with Shutdown Mode 5-SOT-23 -40 to 125
설명하다
98420 PCS
재고
부품 번호
onsemi (Ansemi)
제조업 자
The products NCP1075A and NCP1075B integrate a fixed frequency current mode controller and 700 V MOSFET. Using the very common PDIP 7 encapsulation, with two different pin outputs, provides a high level of integration, including soft start, frequency jitter, short circuit protection, skip cycle, maximum peak current set point, slope compensation and dynamic self-power supply (DSS, no auxiliary winding required). Unlike other monolithic solutions, the NCP1075A and NCP1075B are noiseless: during normal load operation, when switching at one of the available frequencies (65 or 100 kHz). When the demand for output power disappears, the IC automatically enters frequency foldback mode, providing excellent efficiency at light loads. When power demand decreases further, it enters skip mode, reducing standby power consumption to no-load conditions. Protection features include: timers to detect overload or short circuit events, overvoltage protection with automatic recovery. AC input line voltage detection prevents severe runaway under low input voltage conditions (brownout) as well as over high input line (AC line overvoltage protection). This also enables the overpower protection to compensate for any internal delays at high input voltage conditions, optimizing the maximum output current capability. To improve standby performance, connecting an auxiliary winding stops DSS operation, helping to reduce input power consumption on the high line to less than 50 mW.
설명하다
52984 PCS
재고
부품 번호
TI (Texas Instruments)
제조업 자
TPS54062 4.7V to 60V Input, 50mA Synchronous Buck Converter with Low IQ
설명하다
90944 PCS
재고
부품 번호
MICRONE (Nanjing Weimeng)
제조업 자
설명하다
65482 PCS
재고
부품 번호
ZDAUTO (Zhida)
제조업 자
설명하다
69189 PCS
재고
부품 번호
HGC (Shenzhen Hanxin)
제조업 자
설명하다
98294 PCS
재고
부품 번호
TI (Texas Instruments)
제조업 자
TL2844 Current Mode PWM Controller
설명하다
67159 PCS
재고
부품 번호
HI-LINK (HI-LINK)
제조업 자
Input Voltage: 4.5-5.5Vdc\nOutput Voltage: ±15V\nOutput Current: ±0.034A\nOutput Power: 1W\nIsolation Voltage: 3000Vdc\nConversion Efficiency:\nFeatures: Output Short Circuit Protection
설명하다
73936 PCS
재고