Power chip

①Output 12V166mA 2W module power supply;\n②Isolation withstand voltage 3000V;\n③Input range: suitable for all kinds of mains worldwide;\n④Size: length 24.5*width 21.5*height 17.5mm; \n⑤With over-current and over-temperature short-circuit protection Function, moisture-proof, dust-proof and high-temperature resistance\",,,A258B94FB8C145737427389F32615087.jpg, Power IC > Power Module,C920969,Input 85VAC~465VAC Input 100V~650V Output 24V 25W,NV25A24,NYBOXING (Niboxing),NYBOXING,plug-in,,tray,,36,①Output 24V1050mA 25W module power supply;\n②Isolation withstand voltage 3000V;\n③Input range: suitable for all kinds of mains worldwide;\n④Size: length 39.0*width 25.0*height 21.0mm; \n⑤With over-current and over-temperature short-circuit protection Functional

1.5A, Wide Input, Non-Isolated, Wide Inverting Output Regulator Module 5-Surface Mount Module -40 to 85

The FAN3223-25 ​​series of dual 4-A gate drivers provides high peak current pulses with short switching intervals for driving N-channel enhancement mode MOSFETs in low-side switching applications. The driver offers TTL or CMOS input thresholds. Internal circuitry holds the output low until the supply voltage is within operating range, providing undervoltage lockout. In addition, these drivers feature matched internal propagation delays between the A and B channels, making them suitable for applications requiring tightly clocked dual gate drivers, such as synchronous rectifiers. This also enables the parallel connection of the two drivers, effectively doubling the current capability to drive one MOSFET. The FAN322X driver integrates the MillerDrive structure for the final output stage. This bipolar MOSFET combination provides high current during the Miller plateau phase of the MOSFET turn-on/turn-off process to minimize switching losses while providing rail-to-rail voltage swing and reverse current capability. The FAN3223 provides two back drivers and the FAN3224 provides two non-back drivers. Each device has dual independent enable pins that default to an on state if left unconnected. In the FAN3225, each channel has two inputs of opposite polarity and can be configured as non-inverting or inverting with selectable enable using the second input. If one or both inputs are left unconnected, internal resistors bias the inputs so that the output pulls low to keep the power MOSFETs off.

9A/9A single channel gate driver with inverting input, split output and enable 8-HVSSOP 0 to 70