onsemi (Ansemi)

US-8

taping

3000

The FSA3357 is a high-performance, single-pole, three-throw (SP3T) analog switch or 3:1 multiplexer/demultiplexer. The device is fabricated using an advanced sub-micron CMOS process to achieve high-speed enable and disable times and low on-resistance. A break-before-make select circuit prevents interruption of the signal on the B0, B1, or B2 ports because these switches remain temporarily enabled while the select pin switches the device. The device is specified to operate from 1.65 to 5.5V VCC. The control input is tolerant to 5.5V regardless of the VCC operating range.